Krappenfassung

Was ist eine Krappenfassung?

Dies ist die gebräuchlichste Art der Ringfassung. Dabei werden kleine Metallkrallen oder „Krappen“ verwendet, um den Edelstein an seinem Platz zu halten. Die Krappen bestehen meist aus demselben Metall wie der Ringband und sind so gestaltet, dass sie den Stein sicher umschließen.

Verständnis der Krappenfassungen

Eine Krappenfassung ist eine beliebte Methode, um einen Edelstein in Schmuckstücken, insbesondere bei Verlobungsringen, zu befestigen. Diese Fassung verfügt über kleine Metallkrallen, die den Stein seitlich greifen und so maximal viel Licht in den Edelstein lassen. Dadurch kommen Brillanz und Funkeln von Diamanten oder farbigen Steinen besonders gut zur Geltung. Die Anzahl der Krappen variiert typischerweise zwischen 3 und 6, was das Gesamtbild und die Sicherheit des Rings beeinflusst.

Vorteile von Krappenfassungen

Ein großer Vorteil der Krappenfassung ist ihre Fähigkeit, die Schönheit und Brillanz des Steins zu betonen. Da die Krappen den Edelstein sicher halten, bieten sie zudem einen hervorragenden Schutz vor Verlust. Außerdem sind Krappenfassungen vielseitig und passen zu verschiedenen Stilen und Vorlieben. Manche bevorzugen das klassische Aussehen, andere entscheiden sich für moderne Interpretationen mit einzigartigen Krappendesigns. Diese Flexibilität macht Krappenfassungen sowohl bei Juwelieren als auch bei Kunden sehr beliebt.

Pflege und Wartung

Die Pflege einer Krappenfassung umfasst regelmäßige Kontrollen, um sicherzustellen, dass die Krappen fest und unbeschädigt sind. Da die Steine frei liegen, können sich Schmutz und Ablagerungen ansammeln, weshalb eine Reinigung mit einer sanften Lösung oder ein Besuch beim Juwelier zur professionellen Reinigung wichtig ist. Regelmäßige Wartung hilft, mögliche Probleme zu vermeiden, denn ein verlorener Stein kann kostspielige Reparaturen nach sich ziehen. Daher sorgt die sorgfältige Beobachtung Ihrer Krappenfassung dafür, dass Ihr Schmuckstück so strahlend bleibt wie am ersten Tag.


Tipps von John

About John: John is a Syzjewelry jeweler and business owner with 13 years of jewelry-design experience. This guide shares the figures I work to when a stone is set in prongs.

A prong needs at least 0.45 mm of diameter and should cover 30-40% of the stone's girdle.

The numbers I work to

  • Pinpoint prongs: 0.45 mm diameter minimum.
  • Girdle coverage: each prong covers 30-40% of the girdle.
  • Prong height: 0.3-0.4 mm above the stone's depth.
  • Seat: cut 0.05-0.1 mm smaller than the girdle on coloured stones, tighter on diamond.
  • Pave: tolerance of 0.02-0.03 mm, about a quarter of a human hair.

The seat

The seat is where the stone sits, and it is the part nobody sees. A coloured stone gets a seat 0.05-0.1 mm smaller than its girdle. Diamond gets a tighter one.

What goes wrong

0.02 mm does not show in a photograph. It shows three months later, on a bathroom floor.

Using this when you shop

  • The settings on this page are semi-mounts, meaning the stone is set after.
  • If you are having a stone set, ask your setter what seat tolerance they cut to.
  • Check the stone size in millimetres on the listing before anything else.

Figures are ranges from my own bench notes. Actual practice follows each workshop's process card, order requirements and the current standard.

PartWhat I work toWhy it matters
Pinpoint prong0.45 mm diameter minimumA thin prong lets go of the stone
Girdle coverage30-40% per prongHow much of the girdle each prong holds
Prong height0.3-0.4 mm above the stone's depthPart of how the prong holds the stone
Seat0.05-0.1 mm under the girdle (coloured stones)Tighter for diamond
Pave tolerance0.02-0.03 mmAbout a quarter of a human hair

Leitfaden von unserem Designer

Every title says prong, and 22 of the 31 are ring settings. 9 are earrings. Some titles name the prong count, and some also say tulip head or solitaire.

How to choose

  • Read the prong count in the title when it names one.
  • Match the shape and the millimeters on the product page to your stone.
  • The stone is included only when the listing says so.
When the title saysWhat you are matchingListings with that word
ProngA prong head, as the title names it.31
Ring settingA ring mounting.22
EarringsAn earring mounting.9
4 prongsThe title names four prongs.7
6 prongsThe title names six prongs.11
TulipThe title says tulip head.8
SolitaireThe title says solitaire.6
HaloThe title also says halo.5
OvalShape in the title.11
RoundShape in the title.9
AccentThe title names side stones.9
SterlingMetal in the title.12
14KMetal in the title.7
10KMetal in the title.6
PlatinumMetal in the title.3
18KMetal in the title.3

A title can count in more than one row. Counts are titles that contain the word.

FAQs

A prong setting holds the stone with small metal claws. Every title on this page says prong.

22 of the 31 listings are ring settings and 9 are earrings.

Only when the product listing says so. The titles say semi mount, which is the mounting.

Kürzlich angesehene Produkte