Configuración de puntas

¿Qué es un engaste de garras?

Este es el tipo de engaste de anillo más común. Consiste en usar pequeñas garras metálicas o "garras" para sujetar la piedra preciosa en su lugar. Las garras suelen estar hechas del mismo metal que la banda del anillo y están diseñadas para agarrar la piedra de forma segura.

Entendiendo los engastes de garras

Un engaste de garras es un método popular para asegurar una piedra preciosa en joyería, especialmente en anillos de compromiso. Este engaste presenta pequeñas garras metálicas que sujetan la piedra por sus lados, permitiendo que la luz entre al máximo en la gema. Por ello, los engastes de garras muestran de manera hermosa el brillo y el destello de los diamantes o piedras de color. El número de garras puede variar, típicamente de 3 a 6, y esta elección afecta la apariencia general y la seguridad del anillo.

Ventajas de los engastes de garras

Una gran ventaja de usar un engaste de garras es su capacidad para realzar la belleza y el brillo de la piedra. Además, dado que las garras sujetan la gema firmemente, también ofrecen una excelente protección contra la pérdida. Asimismo, los engastes de garras son versátiles, adaptándose a varios estilos y preferencias. Algunas personas prefieren el aspecto clásico, mientras que otras optan por interpretaciones modernas con diseños únicos de garras. Esta flexibilidad hace que los engastes de garras sean una opción favorita tanto para joyeros como para consumidores.

Cuidado y mantenimiento

El cuidado de un engaste de garras implica inspecciones regulares para asegurar que las garras permanezcan firmes y sin daños. Debido a que las piedras están expuestas, puede acumularse suciedad y mugre, por lo que es esencial limpiarlas con una solución suave o acudir a un joyero para una limpieza profesional. El mantenimiento regular ayuda a prevenir problemas potenciales, ya que una piedra perdida puede ocasionar reparaciones costosas. Por lo tanto, vigilar tu engaste de garras garantiza que tu joyería se mantenga tan impresionante como el día que la recibiste.


Consejos de John

About John: John is a Syzjewelry jeweler and business owner with 13 years of jewelry-design experience. This guide shares the figures I work to when a stone is set in prongs.

A prong needs at least 0.45 mm of diameter and should cover 30-40% of the stone's girdle.

The numbers I work to

  • Pinpoint prongs: 0.45 mm diameter minimum.
  • Girdle coverage: each prong covers 30-40% of the girdle.
  • Prong height: 0.3-0.4 mm above the stone's depth.
  • Seat: cut 0.05-0.1 mm smaller than the girdle on coloured stones, tighter on diamond.
  • Pave: tolerance of 0.02-0.03 mm, about a quarter of a human hair.

The seat

The seat is where the stone sits, and it is the part nobody sees. A coloured stone gets a seat 0.05-0.1 mm smaller than its girdle. Diamond gets a tighter one.

What goes wrong

0.02 mm does not show in a photograph. It shows three months later, on a bathroom floor.

Using this when you shop

  • The settings on this page are semi-mounts, meaning the stone is set after.
  • If you are having a stone set, ask your setter what seat tolerance they cut to.
  • Check the stone size in millimetres on the listing before anything else.

Figures are ranges from my own bench notes. Actual practice follows each workshop's process card, order requirements and the current standard.

PartWhat I work toWhy it matters
Pinpoint prong0.45 mm diameter minimumA thin prong lets go of the stone
Girdle coverage30-40% per prongHow much of the girdle each prong holds
Prong height0.3-0.4 mm above the stone's depthPart of how the prong holds the stone
Seat0.05-0.1 mm under the girdle (coloured stones)Tighter for diamond
Pave tolerance0.02-0.03 mmAbout a quarter of a human hair

Guía de nuestro diseñador

Every title says prong, and 22 of the 31 are ring settings. 9 are earrings. Some titles name the prong count, and some also say tulip head or solitaire.

How to choose

  • Read the prong count in the title when it names one.
  • Match the shape and the millimeters on the product page to your stone.
  • The stone is included only when the listing says so.
When the title saysWhat you are matchingListings with that word
ProngA prong head, as the title names it.31
Ring settingA ring mounting.22
EarringsAn earring mounting.9
4 prongsThe title names four prongs.7
6 prongsThe title names six prongs.11
TulipThe title says tulip head.8
SolitaireThe title says solitaire.6
HaloThe title also says halo.5
OvalShape in the title.11
RoundShape in the title.9
AccentThe title names side stones.9
SterlingMetal in the title.12
14KMetal in the title.7
10KMetal in the title.6
PlatinumMetal in the title.3
18KMetal in the title.3

A title can count in more than one row. Counts are titles that contain the word.

Preguntas frecuentes

A prong setting holds the stone with small metal claws. Every title on this page says prong.

22 of the 31 listings are ring settings and 9 are earrings.

Only when the product listing says so. The titles say semi mount, which is the mounting.

Productos Vistos Recientemente