Vástago partido

Comprendiendo el engaste de anillo con shank partido

¿Qué es un engaste de anillo con shank partido?

Un engaste de anillo con shank partido es un diseño cautivador donde la banda del anillo se divide en dos o más partes al acercarse a la piedra central. Esta característica única no solo añade interés visual, sino que también mejora la estabilidad del diamante o gema. Debido a su estructura, un engaste con shank partido puede acomodar una variedad de formas de piedra central, convirtiéndolo en una opción versátil para muchos estilos de joyería.

Beneficios de elegir un engaste con shank partido

Uno de los principales beneficios de un engaste de anillo con shank partido es su capacidad para crear la ilusión de una piedra central más grande. La banda partida atrae la mirada hacia la piedra, enfatizando su belleza. Además, este estilo de engaste puede preparar el escenario para diseños más intrincados, permitiendo añadidos como piedras laterales o detalles únicos a lo largo de las bandas partidas. Sin embargo, es esencial elegir un anillo con shank partido que complemente el estilo del portador.

Cuidado de su anillo con shank partido

Cuidar un engaste de anillo con shank partido es crucial para mantener su belleza. La limpieza regular, usando jabón suave y un cepillo blando, ayudará a mantener las piedras brillantes. Evite exponer el anillo a químicos agresivos o temperaturas extremas, que pueden debilitar el metal o aflojar las piedras. ¡Así que tómese su tiempo para asegurarse de que su anillo se mantenga tan hermoso como el día que lo recibió!


Barra lateral
Filtrar
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Presentado
  • Más relevantes
  • Los más vendidos
  • Alfabéticamente, A-Z
  • Alfabéticamente, Z-A
  • Precio, de menor a mayor
  • Precio, de mayor a menor
  • Fecha, de antigua a nueva
  • Fecha, de nueva a antigua
Clasificar

Ordenar por:

  • Presentado
  • Más relevantes
  • Los más vendidos
  • Alfabéticamente, A-Z
  • Alfabéticamente, Z-A
  • Precio, de menor a mayor
  • Precio, de mayor a menor
  • Fecha, de antigua a nueva
  • Fecha, de nueva a antigua

Consejos de John

About John: John is a Syzjewelry jeweler and business owner with 13 years of jewelry-design experience. This guide shares the minimum thicknesses I work to when a ring is modelled in CAD.

For a ring worn every day, I do not take an 18K shank below 1.5 mm, and platinum can go to 1.3 mm.

I give the 18K and platinum figures because those are the ones I work to. For any other metal, ask before you assume the same number.

The numbers I work to in CAD

  • Structural parts and outer walls: 0.8 mm minimum.
  • Small decorative details: 0.8-1.0 mm.
  • Shank, 18K, daily wear: 1.5 mm minimum.
  • Shank, platinum: 1.3 mm.

Why this matters on a split shank

A split shank divides the band into two parts as it nears the seat. I check the thinnest point of each part, not the widest.

Shrinkage is part of the drawing

Metal shrinks as it cools, so I build the allowance into the CAD from the first drawing: 1.5-2.5% depending on the alloy, plus 2-4% more when the job runs through a rubber mould.

What goes wrong

A 0.6 mm shank draws beautifully on screen and collapses in two months. These figures are not taste. They decide whether the ring can be worn at all.

Using this when you shop

  • Read the setting size in millimetres on the listing first.
  • If thickness matters to you and the listing does not show it, ask before you order.
  • For a split shank, ask about the thinnest point of each part.

Figures are ranges from my own bench notes. Actual practice follows each workshop's process card, order requirements and the current standard.

PartWhat I work toWhy it matters
Structural parts and outer walls0.8 mm minimumDecides whether the ring can be worn, not whether it looks good
Small decorative details0.8-1.0 mmFine detail still has to survive polishing and wear
Shank, 18K, daily wear1.5 mm minimumA 0.6 mm shank collapses in two months
Shank, platinum1.3 mmThe lowest figure I use, and only for platinum
Shrinkage allowance1.5-2.5% by alloy, plus 2-4% through a rubber mouldBuilt in from the first drawing

Guía de nuestro diseñador

Every title says split shank. 97 of 211 also say halo. A few say bypass or double halo. The chart counts those words in the titles.

How to choose

  • Pick the head first: plain, halo, double halo, or bypass. The title says which.
  • Match the shape and the millimeters on the product page to your stone.
  • The center stone is included only when the listing says so.
When the title saysWhat you are matchingListings with that word
Split shankA band that divides near the seat, as the title names it.211
Ring settingA ring mounting.201
HaloThe title also says halo.97
Double haloThe title says double halo.9
BypassThe title also says bypass.6
SolitaireThe title also says solitaire.6
CabochonThe title also says cabochon.5
Art NouveauThe title also says Art Nouveau.5
OvalShape in the title.97
RoundShape in the title.34
CushionShape in the title.28
EmeraldShape in the title.16
PearShape in the title.12
AccentThe title names side stones.101
White topazThe words white topaz.16
MoissaniteThe word moissanite. Read that listing.32
SterlingMetal in the title.87
14KMetal in the title.38
10KMetal in the title.32
PlatinumMetal in the title.27
18KMetal in the title.27

A title can count in more than one row. Counts are titles that contain the word.

Preguntas frecuentes

A split shank is a band that divides into two parts as it nears the center seat. Every title on this page says split shank.

201 of the 211 listings are ring settings.

Only when the product listing says so. The titles say semi mount, which is the mounting.

Productos Vistos Recientemente