Incastonatura a punte

Cos'è un Montatura a Griffe?

Questo è il tipo di montatura per anelli più comune. Consiste nell'usare piccole "griffe" o artigli di metallo per tenere la pietra preziosa al suo posto. Le griffe sono solitamente realizzate nello stesso metallo della fascia dell'anello e sono progettate per afferrare saldamente la pietra.

Comprendere le Montature a Griffe

La montatura a griffe è un metodo popolare per fissare una pietra preziosa nei gioielli, in particolare negli anelli di fidanzamento. Questa montatura presenta piccole griffe metalliche che afferrano la pietra dai lati, permettendo alla luce di entrare al massimo nella gemma. Per questo motivo, le montature a griffe esaltano magnificamente la brillantezza e lo scintillio di diamanti o pietre colorate. Il numero di griffe può variare, solitamente da 3 a 6, e questa scelta influisce sull'aspetto complessivo e sulla sicurezza dell'anello.

Vantaggi delle Montature a Griffe

Un grande vantaggio dell'uso di una montatura a griffe è la sua capacità di valorizzare la bellezza e la brillantezza della pietra. Inoltre, poiché le griffe tengono saldamente la gemma, offrono anche un'eccellente protezione contro la perdita. Le montature a griffe sono inoltre versatili, adatte a vari stili e preferenze. Alcuni preferiscono l'aspetto classico, mentre altri optano per interpretazioni moderne con design unici delle griffe. Questa flessibilità rende le montature a griffe una scelta molto apprezzata sia dai gioiellieri che dai consumatori.

Cura e Manutenzione

Prendersi cura di una montatura a griffe richiede ispezioni regolari per assicurarsi che le griffe rimangano sicure e intatte. Poiché le pietre sono esposte, sporco e impurità possono accumularsi, quindi è essenziale pulirle con una soluzione delicata o rivolgersi a un gioielliere per una pulizia professionale. La manutenzione regolare aiuta a prevenire problemi potenziali, poiché una pietra mancante può comportare costose riparazioni. Pertanto, controllare la montatura a griffe garantisce che i tuoi gioielli rimangano splendenti come il giorno in cui li hai ricevuti.


Consigli da John

About John: John is a Syzjewelry jeweler and business owner with 13 years of jewelry-design experience. This guide shares the figures I work to when a stone is set in prongs.

A prong needs at least 0.45 mm of diameter and should cover 30-40% of the stone's girdle.

The numbers I work to

  • Pinpoint prongs: 0.45 mm diameter minimum.
  • Girdle coverage: each prong covers 30-40% of the girdle.
  • Prong height: 0.3-0.4 mm above the stone's depth.
  • Seat: cut 0.05-0.1 mm smaller than the girdle on coloured stones, tighter on diamond.
  • Pave: tolerance of 0.02-0.03 mm, about a quarter of a human hair.

The seat

The seat is where the stone sits, and it is the part nobody sees. A coloured stone gets a seat 0.05-0.1 mm smaller than its girdle. Diamond gets a tighter one.

What goes wrong

0.02 mm does not show in a photograph. It shows three months later, on a bathroom floor.

Using this when you shop

  • The settings on this page are semi-mounts, meaning the stone is set after.
  • If you are having a stone set, ask your setter what seat tolerance they cut to.
  • Check the stone size in millimetres on the listing before anything else.

Figures are ranges from my own bench notes. Actual practice follows each workshop's process card, order requirements and the current standard.

PartWhat I work toWhy it matters
Pinpoint prong0.45 mm diameter minimumA thin prong lets go of the stone
Girdle coverage30-40% per prongHow much of the girdle each prong holds
Prong height0.3-0.4 mm above the stone's depthPart of how the prong holds the stone
Seat0.05-0.1 mm under the girdle (coloured stones)Tighter for diamond
Pave tolerance0.02-0.03 mmAbout a quarter of a human hair

Guida dal nostro designer

Every title says prong, and 22 of the 31 are ring settings. 9 are earrings. Some titles name the prong count, and some also say tulip head or solitaire.

How to choose

  • Read the prong count in the title when it names one.
  • Match the shape and the millimeters on the product page to your stone.
  • The stone is included only when the listing says so.
When the title saysWhat you are matchingListings with that word
ProngA prong head, as the title names it.31
Ring settingA ring mounting.22
EarringsAn earring mounting.9
4 prongsThe title names four prongs.7
6 prongsThe title names six prongs.11
TulipThe title says tulip head.8
SolitaireThe title says solitaire.6
HaloThe title also says halo.5
OvalShape in the title.11
RoundShape in the title.9
AccentThe title names side stones.9
SterlingMetal in the title.12
14KMetal in the title.7
10KMetal in the title.6
PlatinumMetal in the title.3
18KMetal in the title.3

A title can count in more than one row. Counts are titles that contain the word.

Domande frequenti

A prong setting holds the stone with small metal claws. Every title on this page says prong.

22 of the 31 listings are ring settings and 9 are earrings.

Only when the product listing says so. The titles say semi mount, which is the mounting.

Prodotti Visualizzati Recentemente